Directions of Use
Epic can be applied by hand or by machine. In either application method, thinner is better. If applying with a Dual-Action polisher, we suggest a Lake Country red finishing pad.
- SHAKE WELL!
- Apply a small amount to the perimeter of the pad. Work a 3’x3’ section until the product gets so thin it appears to flash dry-usually about 15-30 seconds.
- Apply a little more Epic to the pad and move on to the next section. Overlapping sections is fine.
- Repeat this process for the entire vehicle. Wait 30 to 45 minutes and wipe off residue with a plush microfiber towel.
If the product is not fully dry, it will smear. Simply wait a bit longer and try again. Epic can be left on the paint for several hours or several days without issue.
Over the next 24-48 hours, Epic will cure with a noticeable increase in slickness. Avoid washing the car for 24 hours after waxing. A rainstorm, or rinsing is fine. Wiping with a QD, such as Prima Slick will not affect the curing process.
Using a detergent on uncured sealant will affect durability.
NOTE: For best results follow Epic with Prima Slick or Hydro immediately after and/or before layering.


